Report on our meeting 28-04-2022, Showtime.

Our meeting on Thursday 28th April 2022 was a Showtime meeting, it was managed by Peter Lawrence and compered by Alec Mutch. The participation from our members was excellent with 12 members showing a total of 46 items, the turn out for this meeting was very good and the response to the members showing their wares was also very good with a hearty round of applause for each of the participants as they completed their presentation.

Continue reading “Report on our meeting 28-04-2022, Showtime.”

Our meeting this week 28-04-2022, Showtime.

Start time 6.45pm.

Our meeting this week on Thursday 28th April 2022 is once again a Showtime meeting. The meeting is organised by Peter Lawrence but I will be doing the job of compere. These meetings are to let others see exactly what you have done recently or indeed in the past, anything that you have made is acceptable and if there is a particular reason or story behind what you have brought in so much the better, but all we really want is for you to show your work. Do not be thinking just because you may have only started woodturning fairly recently that you could not show your work, we want to see everyone’s work, so bring them along, do remember you are not limited in the number of items you bring in to be shown.

Continue reading “Our meeting this week 28-04-2022, Showtime.”

Report on our latest training evening. 21-04-2022.

We had a further training meeting on Thursday 21st April 2022, organised by our training manager Nick Simpson, there were 5 trainees along with 5 tutors, one of his tutors had to be replaced at very short notice due to a family crisis, I was asked by Nick to be the replacement tutor. The trainees were Barry Cumming, Darren Morrison, Richard Sawicki, Tony Wilson and James Montgomery, some were on their 2nd training session, whilst others were on their first training session.

Continue reading “Report on our latest training evening. 21-04-2022.”

Report on our meeting 14-04-2022 Natural edged turning managed by Geoff Potter.

Our meeting this week on Thursday 14th April was all about Natural Edged Turnings, this meeting was managed by Geoff Potter and was the first meeting to feature all 5 lathes in operation since the club re-opened in the Autumn of 2021. The turners for this meeting were, Geoff Potter, Bill Munro, Bob Chisholm, Alan Ross and Dave Line, all were making bowls, some from half a log others from a whole log and Geoff had the strangest looking piece of wood imaginable, but never the less do look at his outcome, it’s the old story of not judging a book by it’s cover, and in this case don’t judge the piece before seeing the outcome.

Continue reading “Report on our meeting 14-04-2022 Natural edged turning managed by Geoff Potter.”

Our next club meeting 14-04-2022. Natural Edge Turning managed by Geoff Potter.

Start time 6.45pm

Our next club meeting is this Thursday 14th April 2022, it’s being managed by Geoff Potter and Geoff’s theme for the meeting is making articles with natural edge features included in the design. This may be something like a burr being used to make a bowl, or half a log even a whole log being turned into a decorative bowl, it could be making a mushroom from a branch.

Continue reading “Our next club meeting 14-04-2022. Natural Edge Turning managed by Geoff Potter.”

Report on our training evening 07-04-2022

Our latest training evening took place on Thursday 7th April 2022 organized by Nick Simpson our Training Manager.

There were 5 tutors with 5 trainees all making a shallow bowl as part of their training, we also had our Safety officer John Ruickbie present along with 2 other observers, Geoff Potter who is also one of the tutors, and Barry Cumming a club member who wanted to observe. The situation with observers is only available through prior arrangement with Nick Simpson our training manager.

Continue reading “Report on our training evening 07-04-2022”

Report on our meeting 31-03-2022, a demonstration by Errol Levings.

Our meeting this week on Thursday 31st March 2022 was a demonstration by Errol Levings, Errol was demonstrating the use of some of the additional items you might need for your woodturning, these were things like Templates, Jigs and Copy devices. He showed and explained the use of various templates, also some items he had made to assist with his woodturning, there was some discussion on whether some of the items were templates or jigs, whatever you wish to call any of them was of little consequence they were all useful in their own field of use.

Continue reading “Report on our meeting 31-03-2022, a demonstration by Errol Levings.”