Our club meeting on Thursday evening 24th January 2019 was a one to one meeting, where an experienced member would take a less experienced member through the process of doing something that they find challenging, this could be some element of turning or it could be sharpening the tools. We had 3 lathes in operation and the sharpening station. Bill Munro was showing Dave Line some of the finer points of spindle turning. Errol Levings was doing long hole boring with Graham Charge, (Graham is a new member to our club). David Hay was at the sharpening station demonstrating the art of sharpening, we had asked the members to bring in a tool to get reground or sharpened, suffice to say David was kept very busy. Lastly I Alec Mutch was demonstrating the use of a bowl gouge with Bill Henderson, Bill has been using tipped tools thus far but now felt it was time to try and use the gouge. The turn out of members was very good and the evening went very well, Peter Lawrence was the manager for this session.
Click any picture for a full sized picture and some text.
All the pictures were taken by Mike Day