You only have a few days left to make a box for this week’s competition on Thursday 21st February 2019. We want to see lots of entries from all 3 categories, if you need any inspiration, there are quite a lot of box designs and ideas on this web site , good luck with your entry and do remember there is a £25 prize for each of the winners in all 3 categories. There will also be all 5 lathes in operation during the evening whilst the competition judging is going on, there should be something for everyone to see and enjoy.
Our AGM on Thursday 7th February 2019 went very well. We had a very good turnout of members and all the existing committee members were present. The chairman made an opening statement, followed by the secretary presenting the minutes of the previous AGM. The chairman did a report on the years events, that was followed by the treasurer giving a report on the financial status. Topics discussed were , the constitution, skype and the internet, membership fees and training fees. As the committee had shrunk to just 7, we voted a few more members onto the committee taking it back up to 12. There were a few items raised under A.O.B. that the chair announced would be discussed at the first committee meeting.
The committee would like to thank all of you who attended the AGM. For a larger picture and some more information, click any of the pictures.
Our AGM is to be held this Thursday 7th February 2019, start time of 18.45pm. We are looking for a good turnout as there are positions to be filled on the committee.
This is likely to be a shorter meeting than normal as there won’t be anything happening out with the AGM business.
Our club meeting on Thursday evening 24th January 2019 was a one to one meeting, where an experienced member would take a less experienced member through the process of doing something that they find challenging, this could be some element of turning or it could be sharpening the tools. We had 3 lathes in operation and the sharpening station. Bill Munro was showing Dave Line some of the finer points of spindle turning. Errol Levings was doing long hole boring with Graham Charge, (Graham is a new member to our club). David Hay was at the sharpening station demonstrating the art of sharpening, we had asked the members to bring in a tool to get reground or sharpened, suffice to say David was kept very busy. Lastly I Alec Mutch was demonstrating the use of a bowl gouge with Bill Henderson, Bill has been using tipped tools thus far but now felt it was time to try and use the gouge. The turn out of members was very good and the evening went very well, Peter Lawrence was the manager for this session.
Click any picture for a full sized picture and some text.
All the pictures were taken by Mike Day
Our club meeting is on Thursday evening 24th January 2019, this will be a one to one meeting where an experienced turner takes a less experienced turner through the process of doing a part of turning they are finding they need a little help with. There will be 2 turners working the lathes David Hutcheson will be going through the process of spindle turning with Dave Line, I will be going through the use of a bowl gouge with Bill Henderson, David Hay is going to deal with sharpening, and we invite you to bring in a tool you think might benefit from some expert advice. John Ruickbie is going to take a novice turner through the process of getting started, this will include a talk on safety, some sharpening and some lathe work. This session is being managed by Peter Lawrence.
Late update for Thursday’s meeting, David Hutcheson can’t be there due to other commitments, however his place has been filled by Bill Munro so the spindle turning with Bill and Dave line will go ahead as planned.
Our first meeting of 2019 was held on Thursday evening 10th January 2019. It was all to do with spindle turning, there were 4 turners working the lathes, Bill Munro who also managed the session along with David Hutcheson, Charles Richards and David McGruer, all were to do different things but with the same theme of spindle turning. The turn out was very good and the evening went well.
Click on any picture to see a full sized picture along with a little text.
Please be advised the first meeting in 2019 is on January 10th at the usual start time.
The meeting will be all about spindle turning, there should be 4 turners working the lathes, Bill Munro, David Hutcheson, Charles Richards and David McGruer, they will all be doing different things with spindle turning, there should be something for everyone to see and hold your interest.
The club committee would like to wish all the members and anyone who views this site a Happy New Year.
It was with some surprise that our club chairman Mark Sutton decided to resign his chairman’s position at our last meeting on the 19th December 2018 with immediate effect. He put his reasoning for his resignation down to personal reasons and pressure of work, in other words he didn’t have the time needed to give to the position that it required.
Through the club’s constitution the deputy chair Alec Mutch will automatically assume the position of chairman.
We hope Mark can still find some time to come to the club in future and perhaps do a demonstration.